S-Inspiration Inspiration Fitness Bedienungsanleitung PDF herunterladen (Seite 15)

Lat Attachment

3 ½” Dia. Pulleys

Step 10

2 - 6 ¼” Hex Bolts

1 - 4 ¼” Hex Bolt

6 - 3/8” Flat Washers

3 - 3/8” Lock Nuts

Step 10: Assure the 1/2” x 1” L Hex Bolt is installed in the top of the Row Pulley Mount and adjusted to

the minimum height. Attach the Lat Attachment and two 3 ½” diameter pulleys to the top of the

Weight Stack Mount and Rear Cross Brace using: Two (3/8” x 6 ¼” Hex Bolts)

One (3/8” x 4 ¼” Hex Bolt)

Six (3/8” Flat Washers)

Three (3/8” Lock Nuts)

2 - 2 ½” Button Head Bolts

2 - 3/8” Thin Lock Nuts

2 - 1” Hex Bolts

8 - 3/8” Flat Washers

2 - 3/8” Lock Nuts

Now install two Brackets supporting the Lat Attachment to Pull Up Cross Brace with the Button

Head Bolts, pointing up through the Pull Up Cross Brace. Use 2 ½” long Button Head Bolts with the

locknut on top of the Lat Attachment. Use the 1” Hex Bolts to secure the height adjustment of the

brackets together using: Two (3/8” x 2 ½” Button Head Bolts)

Two (3/8” x 1” Hex Bolts)

Eight (3/8” Flat Washers)

Two (3/8” Lock Nuts)

(Wrench Tighten Now) Two (3/8” Thin Lock Nuts)

Note: Adjust the 1/2” x 1” L support Bolt in the top of the Row Pulley Mount up

to support the load of the Lat Attachment.

Page 12

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Keine Kommentare

S-Inspiration Inspiration Fitness Bedienungsanleitung Seite 15